For use on clean, dry and non-porous smooth surface free of grease dirt. Use when the surface temperature is above 10°C and below 40 °C
To apply hook
1. Clean surface and leave to dry thoroughly. 2. Carefully peel the backing paper off the tape, avoid touching the adhesive. 3. Position the hook in the desired location and press firmly for 60 seconds to ensure good contact. 4. Leave for 12 hours before use.
To remove hook
1. Take hold of the release tab firmly. 2. Hold the base of the hook 3. Pull the release tab slowly straight downwards along the wall surface until the hook releases.